Datasheet

ManualsBrandsNICHIA ManualsLEDs & AccessoriesLED wired Amber Rectangular 7.6 x 7.6 mm 115 ° 30 mA 3.4 V

NICHIA STS-DA1-2420 <Cat.No.120427>

NICHIA CORPORATION

SPECIFICATIONS FOR AMBER LED

NSPAR70BSS

● RoHS Compliant

Summary of content (17 pages)

PAGE 1
NICHIA STS-DA1-2420
PAGE 2
NICHIA STS-DA1-2420 SPECIFICATIONS (1) Absolute Maximum Ratings Symbol Absolute Maximum Rating Unit Forward Current Item IF 40 mA Pulse Forward Current IFP 120 mA Reverse Voltage VR 5 V Power Dissipation PD 148 mW Operating Temperature Topr -30~85 °C Storage Temperature Tstg -40~100 °C Junction Temperature TJ 100 °C * Absolute Maximum Ratings at TA=25°C. * IFP conditions with pulse width ≤10ms and duty cycle ≤10%.
PAGE 3
NICHIA STS-DA1-2420 RANKS Item Rank Min Max Unit Forward Voltage - 2.7 3.7 V Reverse Current - - 50 µA Pz 3.8 4.5 Py 3.2 3.8 Px 2.7 3.2 Pw 2.3 2.7 Luminous Flux lm Color Rank Rank L x 0.603 0.532 0.522 0.589 y 0.397 0.467 0.460 0.393 * Ranking at TA=25°C. * Tolerance of measurements of the Forward Voltage is ±3%. * Tolerance of measurements of the Luminous Flux is ±10%. * Tolerance of measurements of the Chromaticity Coordinate is ±0.01.
PAGE 4
NICHIA STS-DA1-2420 CHROMATICITY DIAGRAM 0.50 580 585 0.45 y L 590 0.40 595 600 0.35 0.30 0.45 0.50 0.55 0.60 0.
PAGE 5
NICHIA STS-DA1-2420 OUTLINE DIMENSIONS * 本製品はRoHS指令に適合しております。 This product complies with RoHS Directive. 管理番号 No. NSPxR70BS STS-DA7-2783 (単位 Unit: mm, 公差 Tolerance: (単位 Unit:±0.2) mm) 1 2 7.62±0.5 3 3 4 5.08±0.3 (5°) 0.4±0.1 7.62±0.5 1.4 MAX Pin-1 Mark 1.1 2.5±0.5 0.5 0.5 1.55 7.5±0.5 4.4 ストッパー部詳細図 Lead Standoff 0.76±0.1 (0.4) (0.4) 5.
PAGE 6
NICHIA STS-DA1-2420 SOLDERING • Recommended Hand Soldering Condition • Recommended Dip Soldering Condition Temperature 350°C Max Pre-Heat 120°C Max Soldering Time 3sec Max Pre-Heat Time 60sec Max No closer than 1.6mm Solder Bath under the standoff. Temperature Position Dipping Time Dipping Position 260°C Max 5sec Max No closer than 1.6mm under the standoff. * For a better thermal performance, copper alloy is used for the leadframe of the product.
PAGE 7
NICHIA STS-DA1-2420 TUBE DIMENSIONS スティック断面図 Cross Section 管理番号 No. NxxxR70xxx STS-DA7-2772 (単位 Unit: mm, 公差 Tolerance: ±0.2) 5.85 9 11.8 5.4 * t=0.6±0.1mm * 反り: 1mm以下 Warp: 1mm MAX 3 9.
PAGE 8
NICHIA STS-DA1-2420 PACKAGING - TUBE PACK シリカゲルとともにスティックをアルミ防湿袋に入れ、熱シールにより封をします。 Tubes are shipped with desiccants in heat-sealed moisture-proof bags. シリカゲル Moisture Absorbent Material スティック Tube アルミ防湿袋 Moisture-proof bag 管理番号 No. Nxxxxxxx STS-DA7-0005C ラベル Label XXXX LED TYPE Nxxxxxxx ******* LOT YMxxxx-RRR QTY.
PAGE 9
NICHIA STS-DA1-2420 LOT NUMBERING SCHEME Lot Number is presented by using the following alphanumeric code.
PAGE 10
NICHIA STS-DA1-2420 DERATING CHARACTERISTICS 管理番号 No. NSPxR70BS STS-DA7-2784 周囲温度-許容順電流特性 Ambient Temperature vs Allowable Forward Current Derating1 許容順電流 Allowable Forward Current(mA) 50 (33, 40.0) 40 30 20 10 (85, 8.
PAGE 11
NICHIA STS-DA1-2420 OPTICAL CHARACTERISTICS * 本特性は参考です。 All characteristics shown are for reference only and are not guaranteed. 管理番号 No. 発光スペクトル Spectrum NSPAR70BS STS-DA7-2785 T A=25°C IF=30mA Spectrum 1.0 相対発光強度 Relative Emission Intensity(a.u.) 0.8 0.6 0.4 0.2 0.
PAGE 12
NICHIA STS-DA1-2420 FORWARD CURRENT CHARACTERISTICS / TEMPERATURE CHARACTERISTICS * 本特性は参考です。 All characteristics shown are for reference only and are not guaranteed. 順電圧-順電流特性 Forward Voltage vs Forward Current 管理番号 No. 周囲温度-順電圧特性 Ambient Temperature vs Forward Voltage VfIf T A=25°C 1000 NSPAR70BS STS-DA7-2786 TaVf IFP=30mA 5.0 120 100 順電圧 Forward Voltage(V) 順電流 Forward Current(mA) 4.5 30 10 4.0 3.5 3.0 2.5 1 2.0 2.0 2.5 3.0 3.5 4.0 4.5 5.
PAGE 13
NICHIA STS-DA1-2420 FORWARD CURRENT CHARACTERISTICS / TEMPERATURE CHARACTERISTICS * 本特性は参考です。 All characteristics shown are for reference only and are not guaranteed. 順電流-色度特性 Forward Current vs Chromaticity Coordinate 管理番号 No. NSPAR70BS STS-DA7-2787 Ifxy TA=25°C 0.44 0.43 120mA y 30mA 1mA 0.42 0.41 0.56 0.57 0.58 0.59 x 周囲温度-色度特性 Ambient Temperature vs Chromaticity Coordinate Taxy I FP= 30mA 0.44 0.43 -30°C y 25°C 85°C 0.42 0.41 0.56 0.57 0.58 0.
PAGE 14
NICHIA STS-DA1-2420 RELIABILITY (1) Tests and Results Reference Test Test Test Conditions Standard Resistance to JEITA ED-4701 Soldering Heat 300 302 Duration 1.6mm under the lead standoff Failed/Tested #1 0/50 #2 0/50 100cycles #1 0/50 10cycles #1 0/50 #1 0/50 #1 0/50 Precondition: 30°C, 70%RH, 168hr Tsld=245±5°C, 5sec, 303 303A Lead-free Solder(Sn-3.0Ag-0.
PAGE 15
NICHIA STS-DA1-2420 CAUTIONS (1) Storage Conditions Storage Temperature Humidity Time Before Opening Aluminum Bag ≤30°C ≤90%RH Within 1 Year from Delivery Date After Opening Aluminum Bag ≤30°C ≤70%RH ≤168hours 85°C - ≥24hours Baking ● Nichia LED leadframe are silver plated copper alloy. This silver surface may be affected by environments which contain corrosive substances. Please avoid conditions which may cause the LED to corrode, tarnish or discolor.
PAGE 16
NICHIA STS-DA1-2420 (5) Electrostatic Discharge (ESD) ● The products are sensitive to static electricity or surge voltage. ESD can damage a die and its reliability.
PAGE 17
NICHIA STS-DA1-2420 (9) Others ● The LEDs described in this brochure are intended to be used for ordinary electronic equipment (such as office equipment, communications equipment, measurement instruments and household appliances).