Datasheet

ManualsBrandsNICHIA ManualsLEDs & AccessoriesLED wired Green Circular 3 mm 36100 mcd 15 ° 20 mA 3.2 V

NICHIA STS-DA1-2384 <Cat.No.120330>

NICHIA CORPORATION

SPECIFICATIONS FOR GREEN LED

NSPG300D

● RoHS Compliant

Summary of content (16 pages)

PAGE 1
NICHIA STS-DA1-2384
PAGE 2
NICHIA STS-DA1-2384 SPECIFICATIONS (1) Absolute Maximum Ratings Symbol Absolute Maximum Rating Unit Forward Current Item IF 35 mA Pulse Forward Current IFP 110 mA Reverse Voltage VR 5 V Power Dissipation PD 126 mW Operating Temperature Topr -30~85 °C Storage Temperature Tstg -40~100 °C Junction Temperature TJ 100 °C * Absolute Maximum Ratings at TA=25°C. * IFP conditions with pulse width ≤10ms and duty cycle ≤10%.
PAGE 3
NICHIA STS-DA1-2384 RANKS Item Rank Min Max Unit Forward Voltage - 2.75 3.60 V Reverse Current - - 50 µA W 34.80 49.50 V 24.64 34.80 U 17.60 24.64 Luminous Intensity cd Color Ranks Rank G Rank H x 0.14 0.14 0.22 0.22 x 0.21 0.21 0.28 0.28 y 0.64 0.74 0.74 0.64 y 0.65 0.73 0.73 0.65 * Ranking at TA=25°C. * Tolerance of measurements of the Forward Voltage is ±3%. * Tolerance of measurements of the Luminous Intensity is ±10%.
PAGE 4
NICHIA STS-DA1-2384 CHROMATICITY DIAGRAM 0.80 535 540 0.75 545 0.70 550 H y G 555 0.65 0.60 0.55 0.10 0.15 0.20 0.25 0.30 0.
PAGE 5
NICHIA STS-DA1-2384 OUTLINE DIMENSIONS * 本製品はRoHS指令に適合しております。 This product complies with RoHS Directive. 管理番号 No. NSPx300x STS-DA7-2519 (単位 Unit: mm, 公差 Tolerance: (単位 Unit:±0.2) mm) 0.75 MAX 3.5 Φ3.8 1.5 MAX Φ3.1 (2.5) Cathode □0.5±0.05 Anode 5 1 6 11±0.5 (2) 27.5±1 項目 Item 内容 Description 樹脂材質 Resin Materials エポキシ樹脂 Epoxy Resin リードフレーム材質 Lead Frame Materials 銅合金+銀メッキ Ag-plated Copper Alloy 質量 Weight 0.
PAGE 6
NICHIA STS-DA1-2384 SOLDERING • Recommended Hand Soldering Condition • Recommended Dip Soldering Condition Temperature 350°C Max Pre-Heat 120°C Max Soldering Time 3sec Max Pre-Heat Time 60sec Max No closer than 3mm from Solder Bath the base of the lens. Temperature Position Dipping Time Dipping Position 260°C Max 10sec Max No closer than 3mm from the base of the lens. * For a better thermal performance, copper alloy is used for the leadframe of the product.
PAGE 7
NICHIA STS-DA1-2384 PACKAGING - BULK 管理番号 No. Nxxxxxxx STS-DA7-0001B 袋の表示 Label printed on the bag 帯電防止袋 Anti-electrostatic Bag XXXX LED Type Nxxxxxxx ******* Lot YMxxxx-RRR Qty pcs RoHS NICHIA CORPORATION 491 OKA, KAMINAKA, ANAN, TOKUSHIMA, JAPAN CAUTION TO ELECTROSTATIC DAMAGE 静電気に注意帯電防止袋を並べて入れ、ダンボールで仕切ります。 Anti-electrostatic bags are packed in cardboard boxes with corrugated partitions. ラベル Label attached to the box XXXX LED TYPE Nxxxxxxx ******* RANK RRR QTY.
PAGE 8
NICHIA STS-DA1-2384 LOT NUMBERING SCHEME Lot Number is presented by using the following alphanumeric code.
PAGE 9
NICHIA STS-DA1-2384 DERATING CHARACTERISTICS 管理番号 No. NSPx300x(S) STS-DA7-2520 周囲温度-許容順電流特性 Ambient Temperature vs Allowable Forward Current Derating1 許容順電流 Allowable Forward Current(mA) 50 40 (40, 35.0) 30 20 10 (85, 8.
PAGE 10
NICHIA STS-DA1-2384 OPTICAL CHARACTERISTICS * 本特性は参考です。 All characteristics shown are for reference only and are not guaranteed. 管理番号 No. 発光スペクトル Spectrum NSPG300D(S) STS-DA7-2524 T A=25°C IF=20mA Spectrum 1.0 相対発光強度 Relative Emission Intensity(a.u.) 0.8 0.6 0.4 0.2 0.
PAGE 11
NICHIA STS-DA1-2384 FORWARD CURRENT CHARACTERISTICS / TEMPERATURE CHARACTERISTICS * 本特性は参考です。 All characteristics shown are for reference only and are not guaranteed. 順電圧-順電流特性 Forward Voltage vs Forward Current 管理番号 No. 周囲温度-順電圧特性 Ambient Temperature vs Forward Voltage VfIf T A=25°C 1000 NSPG300D(S) STS-DA7-2525 IFP=5mA IFP= 20mA IFP= 60mA TaVf 4.5 110 100 順電圧 Forward Voltage(V) 順電流 Forward Current(mA) 4.0 20 10 3.5 3.0 2.5 1 2.0 2.0 2.5 3.0 3.5 4.0 4.
PAGE 12
NICHIA STS-DA1-2384 FORWARD CURRENT CHARACTERISTICS / TEMPERATURE CHARACTERISTICS * 本特性は参考です。 All characteristics shown are for reference only and are not guaranteed. 順電流-色度(主波長)特性 Forward Current vs Chromaticity Coordinate(λd) 管理番号 No. NSPG300D(S) STS-DA7-2526 TA=25°C Ifxy 0.80 0.75 35mA(523nm) 20mA(525nm) 5mA(530nm) y 0.70 110mA(516nm) 1mA(535nm) 0.65 0.60 0.55 0.05 0.10 0.15 0.20 0.25 0.
PAGE 13
NICHIA STS-DA1-2384 RELIABILITY (1) Tests and Results Reference Test Test Test Conditions Standard Duration Resistance to JEITA ED-4701 Tsld=260±5°C, 10sec, 1dip, Soldering Heat 300 302 3mm from the base of the lens JEITA ED-4701 Tsld=245±5°C, 5sec, 303 303A Lead-free Solder(Sn-3.0Ag-0.
PAGE 14
NICHIA STS-DA1-2384 CAUTIONS (1) Lead Forming ● When forming leads, the leads should be bent at a point at lease 3mm from the base of the epoxy bulb. Do not use the base of the leadframe as a fulcrum during lead forming. ● Lead forming should be done before soldering. ● Do not apply any bending stress to the base of the lead. The stress to the base may damage the LED's characteristics or it may break the LEDs.
PAGE 15
NICHIA STS-DA1-2384 (6) Electrostatic Discharge (ESD) ● The products are sensitive to static electricity or surge voltage. ESD can damage a die and its reliability.
PAGE 16
NICHIA STS-DA1-2384 (10) Others ● The LEDs described in this brochure are intended to be used for ordinary electronic equipment (such as office equipment, communications equipment, measurement instruments and household appliances).