NICHIA STS-DA1-2160
NICHIA STS-DA1-2160 SPECIFICATIONS (1) Absolute Maximum Ratings Symbol Absolute Maximum Rating Unit Forward Current Item IF 20 mA Pulse Forward Current IFP 80 mA Allowable Reverse Current IR 85 mA Power Dissipation PD 80 mW Operating Temperature Topr -30~85 °C Storage Temperature Tstg 40~100 °C Junction Temperature TJ 100 °C * Absolute Maximum Ratings at TA=25°C. * IFP conditions with pulse width ≤10ms and duty cycle ≤10%.
NICHIA STS-DA1-2160 RANKS Item Forward Voltage Radiant Flux Peak Wavelength Rank Min Max Unit V - 2.9 4.0 9 9600 13600 8 6800 9600 7 4800 6800 370 380 Ub µW nm * Ranking at TA=25°C. * Tolerance of measurements of the Forward Voltage is ±3%. * Tolerance of measurements of the Radiant Flux is ±10%. * Tolerance of measurements of the Peak Wavelength is ±3nm. * A shipment shall consist of LEDs in a combination of the above ranks.
NICHIA STS-DA1-2160 OUTLINE DIMENSIONS * 本製品はRoHS指令に適合しております。 This product complies with RoHS Directive. 管理番号 No. NSPU510CS STS-DA7-2055 (単位 Unit:±0.2) mm) (単位 Unit: mm, 公差 Tolerance: Anode 1 5.3±0.5 Φ5 1.1 □0.5±0.05 (2.5) Cathode 1.5 MAX 7.1 8.3 5.6 12.1±0.5 (2) 28.6±1 ストッパー部詳細図 Lead Standoff A 0.
NICHIA STS-DA1-2160 SOLDERING • Recommended Hand Soldering Condition • Recommended Dip Soldering Condition Temperature 350°C Max Pre-Heat 120°C Max Soldering Time 3sec Max Pre-Heat Time 60sec Max No closer than 3mm from Solder Bath the base of the lens. Temperature Position Dipping Time Dipping Position 260°C Max 10sec Max No closer than 3mm from the base of the lens. * For a better thermal performance, copper alloy is used for the leadframe of the product.
NICHIA STS-DA1-2160 PACKAGING - BULK 管理番号 No. Nxxxxxxx STS-DA7-1137A 袋の表示 Label printed on the bag 帯電防止袋 Anti-electrostatic Bag UV LED Type Lot Qty Nxxxxxxx ******* YMxxxx-RRR pcs RoHS NICHIA CORPORATION 491 OKA, KAMINAKA, ANAN, TOKUSHIMA, JAPAN UV LED LED RADIATION LED放射 CAUTION TO ELECTROSTATIC DAMAGE 静電気に注意 警告ラベル Warning and Explanatory Labels LE LED 放射 D 光学測定装置で 帯電防止袋を並べて入れ、ダンボールで仕切ります。 Anti-electrostatic bags are packed in cardboard boxes with corrugated partitions.
NICHIA STS-DA1-2160 LOT NUMBERING SCHEME Lot Number is presented by using the following alphanumeric code.
NICHIA STS-DA1-2160 DERATING CHARACTERISTICS 管理番号 No. NSPU510CS STS-DA7-2056 周囲温度-許容順電流特性 Ambient Temperature vs Allowable Forward Current Derating1 25 許容順電流 Allowable Forward Current(mA) (25, 20.0) 20 15 10 (85, 4.
NICHIA STS-DA1-2160 OPTICAL CHARACTERISTICS * 本特性は参考です。 All characteristics shown are for reference only and are not guaranteed. 管理番号 No. 発光スペクトル Spectrum NSPU510CS STS-DA7-2057 T A=25°C IF=15mA Spectrum 1.0 相対発光強度 Relative Emission Intensity(a.u.) 0.8 0.6 0.4 0.2 0.
NICHIA STS-DA1-2160 FORWARD CURRENT CHARACTERISTICS / TEMPERATURE CHARACTERISTICS * 本特性は参考です。 All characteristics shown are for reference only and are not guaranteed. 順電圧-順電流特性 Forward Voltage vs Forward Current 周囲温度-順電圧特性 Ambient Temperature vs Forward Voltage VfIf T A=25°C 順電圧 Forward Voltage(V) 15 10 1 TaVf IFP=15mA 4.0 3.5 3.0 3.0 3.5 4.0 4.
NICHIA STS-DA1-2160 FORWARD CURRENT CHARACTERISTICS / TEMPERATURE CHARACTERISTICS * 本特性は参考です。 All characteristics shown are for reference only and are not guaranteed. 順電流-ピーク波長特性 Forward Current vs Peak Wavelength 管理番号 No.
NICHIA STS-DA1-2160 RELIABILITY (1) Tests and Results Reference Test Test Test Conditions Standard Duration Resistance to JEITA ED-4701 Tsld=260±5°C, 10sec, 1dip, Soldering Heat 300 302 3mm from the base of the lens JEITA ED-4701 Tsld=245±5°C, 5sec, 303 303A Lead-free Solder(Sn-3.0Ag-0.
NICHIA STS-DA1-2160 CAUTIONS (1) Lead Forming ● When forming leads, the leads should be bent at a point at lease 3mm from the base of the epoxy bulb. Do not use the base of the leadframe as a fulcrum during lead forming. ● Lead forming should be done before soldering. ● Do not apply any bending stress to the base of the lead. The stress to the base may damage the LED's characteristics or it may break the LEDs.
NICHIA STS-DA1-2160 (6) Electrostatic Discharge (ESD) ● The products are sensitive to static electricity or surge voltage. ESD can damage a die and its reliability.
NICHIA STS-DA1-2160 (10) Others ● The LEDs described in this brochure are intended to be used for ordinary electronic equipment (such as office equipment, communications equipment, measurement instruments and household appliances).
