NICHIA STS-DA1-1477A
NICHIA STS-DA1-1477A SPECIFICATIONS (1) Absolute Maximum Ratings Symbol Absolute Maximum Rating Unit Forward Current Item IF 30 mA Pulse Forward Current IFP 100 mA Reverse Voltage VR 5 V Power Dissipation PD 105 mW Operating Temperature Topr -30~85 °C Storage Temperature Tstg -40~100 °C Junction Temperature TJ 100 °C * Absolute Maximum Ratings at TA=25°C. * IFP conditions with pulse width ≤10ms and duty cycle ≤10%.
NICHIA STS-DA1-1477A RANKS Item Rank Min Max Unit Forward Voltage - 2.65 3.50 V Reverse Current - - 50 µA W 31.0 44.0 V 22.0 31.0 U 15.5 22.0 Luminous Intensity cd Color Ranks Rank a0 Rank b1 x 0.280 0.264 0.283 0.296 x 0.283 0.287 0.330 0.330 y 0.248 0.267 0.305 0.276 y 0.305 0.295 0.339 0.360 Rank b2 Rank c0 x 0.296 0.287 0.330 0.330 x 0.330 0.330 0.361 0.356 y 0.276 0.295 0.339 0.318 y 0.318 0.360 0.385 0.
NICHIA STS-DA1-1477A CHROMATICITY DIAGRAM 0.45 0.40 c0 0.35 y b1 b2 0.30 a0 0.25 0.20 0.20 0.25 0.30 0.35 0.40 0.
NICHIA STS-DA1-1477A OUTLINE DIMENSIONS * 本製品はRoHS指令に適合しております。 This product complies with RoHS Directive. 管理番号 No. NSPW500DS STS-DA7-0353 (単位 Unit:±0.2) mm) (単位 Unit: mm, 公差 Tolerance: Anode 1 5.6 5.3 Φ5 1.1 □0.5±0.05 (2.5) Cathode 1.5 MAX 7.6 8.6 12.4±0.5 (2) 28.9±1 内容 Description 樹脂材質 Resin Materials エポキシ樹脂(一部蛍光体入り) Epoxy Resin(partly using phosphor) リードフレーム材質 Lead Frame Materials 銅合金+銀メッキ Ag-plated Copper Alloy 質量 Weight 0.
NICHIA STS-DA1-1477A SOLDERING • Dip Soldering • Hand Soldering Temperature 350°C Max Pre-Heat 120°C Max Soldering Time 3sec Max Pre-Heat Time 60sec Max No closer than 3mm from Solder Bath the base of the lens. Temperature Position Dipping Time Dipping Position 260°C Max 10sec Max No closer than 3mm from the base of the lens. * For a better thermal performance, copper alloy is used for the leadframe of the product.
NICHIA STS-DA1-1477A PACKAGING - BULK 管理番号 No. Nxxxxxxx STS-DA7-0001A 袋の表示 Label printed on the bag 帯電防止袋 Anti-electrostatic Bag XXXX LED Type Nxxxxxxx ******* Lot YMxxxx-RRR Qty pcs RoHS NICHIA CORPORATION 491 OKA, KAMINAKA, ANAN, TOKUSHIMA, JAPAN CAUTION TO ELECTROSTATIC DAMAGE 静電気に注意 帯電防止袋を並べて入れ、 ダンボールで仕切ります。 The anti-electrostatic bags are packed in a cardboard box with corrugated partition. ラベル Label attached to the box XXXX LED TYPE Nxxxxxxx ******* RANK RRR QTY.
NICHIA STS-DA1-1477A LOT NUMBERING SCHEME Lot Number is presented by using the following alphanumeric code.
NICHIA STS-DA1-1477A DERATING CHARACTERISTICS 管理番号 No. NSPW500D(S) STS-DA7-0599 周囲温度-許容順電流特性 Ambient Temperature vs Allowable Forward Current Derating1 許容順電流 Allowable Forward Current(mA) 50 40 (47, 30.0) 30 20 10 (85, 8.
NICHIA STS-DA1-1477A OPTICAL CHARACTERISTICS * 本特性は参考です。 All characteristics shown are for reference only and are not guaranteed. 管理番号 No. 発光スペクトル Spectrum NSPW500D(S) STS-DA7-0772 T A=25°C IF=20mA Spectrum 1.0 相対発光強度 Relative Emission Intensity(a.u.) 0.8 0.6 0.4 0.2 0.
NICHIA STS-DA1-1477A FORWARD CURRENT CHARACTERISTICS / TEMPERATURE CHARACTERISTICS * 本特性は参考です。 All characteristics shown are for reference only and are not guaranteed. 順電圧-順電流特性 Forward Voltage vs Forward Current 管理番号 No. 周囲温度-順電圧特性 Ambient Temperature vs Forward Voltage VfIf T A=25°C 100 NSPW500D(S) STS-DA7-0773 IFP=5 mA IFP= 20 mA IFP= 60 mA TaVf 4.5 順電圧 Forward Voltage(V) 順電流 Forward Current(mA) 4.0 20 10 3.5 3.0 1 2.5 2.5 3.0 3.5 4.0 4.
NICHIA STS-DA1-1477A FORWARD CURRENT CHARACTERISTICS / TEMPERATURE CHARACTERISTICS * 本特性は参考です。 All characteristics shown are for reference only and are not guaranteed. 順電流-色度特性 Forward Current vs Chromaticity Coordinate 管理番号 No. NSPW500D(S) STS-DA7-0774 Ifxy TA=25°C 0.34 1mA y 0.33 5mA 0.32 20mA 30mA 0.31 100mA 0.30 0.29 0.30 0.31 0.32 0.33 x 周囲温度-色度特性 Ambient Temperature vs Chromaticity Coordinate Taxy I FP= 20 mA 0.34 -30°C 0.33 y 0°C 0.32 25°C 50°C 0.31 85°C 0.
NICHIA STS-DA1-1477A RELIABILITY (1) Tests and Results Reference Test Test Test Conditions Standard Duration Resistance to JEITA ED-4701 Tsld=260±5°C, 10sec, 1dip, Soldering Heat 300 302 3mm from the base of the lens JEITA ED-4701 Tsld=245±5°C, 5sec, 303 303A Lead-free Solder(Sn-3.0Ag-0.
NICHIA STS-DA1-1477A CAUTIONS (1) Lead Forming ● When forming leads, the leads should be bent at a point at lease 3mm from the base of the epoxy bulb. Do not use the base of the leadframe as a fulcrum during lead forming. ● Lead forming should be done before soldering. ● Do not apply any bending stress to the base of the lead. The stress to the base may damage the LED's characteristics or it may break the LEDs.
NICHIA STS-DA1-1477A (6) Electrostatic Discharge (ESD) ● The products are sensitive to static electricity or surge voltage. An ESD event may damage its die or reduce its reliability performance. When handling the products, measures against electro static discharge, including the followings, are strongly recommended.
NICHIA STS-DA1-1477A (10) Others ● The LEDs described in this brochure are intended to be used for ordinary electronic equipment (such as office equipment, communications equipment, measurement instruments and household appliances).