Installation Instructions
Outside and Inside Corners
•Do not install the KuraStone™ outside corner pieces first. Install them at
the same time as the same-coursed pieces.
• Install the pre-mitered outside corner and butt adjacent to KuraStone wall
piece tightly to it. Attach a clip at top of the vertical joints on either side of
corner, as well as a clip 2-3” from outside corner on the long length side.
• When cutting pieces is necessary, cut the adjacent KuraStone wall piece,
not the corner piece.
•At inside corners, KuraStone wall pieces can be butted together. Fill the
joint with ASTM C-920 polyurethane sealant.
• Wall pieces can also be mitered to create a sharp 90 degree angle.
• Attach panel clips at the nearest joint to the inside corner and within 2-3”
of the inside corner on both sides.
Storage and HandlingOutside and Inside Corners
Flip corners on each course so that a long side always
aligns with a short side, and continue along the length of
the corner.
Long
Returns
Short
Returns
Plywood/OSB
Sheathing
Water
Proong
Barrier (Black)
Screw
Outside Corner Piece
KuraStone
TM
Clip
6