Technical Specifications

SEALANT BACKERS

Nichiha Sealant Backers provide exact spacing for expansion and

termination joints and the recommended depth of sealant (75-80%).

They provide faster installation than a foam backer rod and require less

sealant. At sealant joints, use a sealant that complies with ASTM C-920.

Higher quality polyurethane or hybrid sealants are preferred.

Single Flange Sealant Backer: FHK 1017 – 10 mm

Double Flange Sealant Backer: FH 1020 – 10 mm

PANEL CORNERS

Nichiha outside panel Corners are manufactured mitered panel corners

available in the same finishes as all horizontally oriented AWP. Corners have

3-1/2” returns (face dimension).

METAL TRIM OPTIONS

Nichiha metal trim provides aesthetically pleasing design options for

corners, openings, and transitions, as well as vertical joints.

TRIM APPLICATIONS

Corner Key Outside Corners

H-Mold Vertical Joints

Open Outside Corner Outside Corners

Bead Reveal Vertical Joints

J-Mold Terminations

L-Trim Terminations

ESSENTIAL FLASHING SYSTEM A PPLICATIONS

Starter* Base/Clearance Concealment

Compression Joint Horizontal/Compression Joints

Overhang* Fascia-to-Soffit Transitions

*Inside and outside corner segments are available.