Installation Guide

LED HIGH BAY
INSTALLATION INSTRUCTIONS
To prevent death, injury or damage to property, this product must be installed in accordance to National Electrical Code (NFPA70) in
the US or Canadian Electrical Code (CSA 22.1) in Canada.
Risk of re or electric shock. The electrical rating of these products are 120-277 Vac, the installer must determine whether they have
120-277 V at the luminaire before installation.
Risk of re or electric shock. LED High Bay installation requires knowledge of luminaires electrical systems. If not qualied, do not
attempt installation. Contact a qualied electrician.
To prevent wiring damage or abrasion, do not expose wiring to edges of sheet metal or other sharp objects.
Disconnect power before installing the product or servicing it.
Wait until xture has cooled down before installing or servicing the xture.
MIN. 90°C SUPPLY CONDUCTORS
What’s In The Box
Tools Needed
One (1) LED High Bay
Included Accessories
This LED High Bay requires very few tools for installation.
A screwdriver and a pair of wirecutters will help with installation.
Wire Guard
Chain Kit
Pendant Kit
Carefully unpack the xture from its packaging. Inspect product
for defects due to shipping.
Turn o power to appropriate circuit at the breaker panel.
1
2
Installing LED High Bay
Optional Accessories