Installation & Assembly

WARNING: Before wiring to the power supply, turn off the electricity at fuse or circuit
breaker box. Ensure grounding to avoid potential electrical shock and to ensure
reliable lamp starting.
1) Loosen the screws, remove the housing from the back of the fixture ( see picture below ）.
2) Carefully turn the fixture housing over and locate the center knockout on the housing.
Using a screw driver, carefully remove the center knockout.
4) Coordinate mounting position in the room with the power supply wires coming from the
" JUNCTION BOX " located in the ceiling. If you do not have a " JUNCTION BOX " in the ceiling,
consult a qualified professional electrician.
INSTALLATION INSTRUCTIONS
PREPARATION OF LIGHT FIXTURE FOR INSTALLATION