Installation & Assembly

WARNING: Before wiring to the power supply, turn off the electricity at fuse or circuit breaker
box. Ensure grounding to avoid potential electrical shock and to ensure reliable lamp operation.
1) Connect the black supply ( house ) wire to the
black wire from the light fixture. Secure the
connection using a wirenut.
See diagram 1.
2) Connect the white supply ( house ) wire to the
white wire from the light fixture. Secure the
connection using a wirenut.
See diagram 1.
CHECK TO MAKE SURE NO BARE WIRES
ARE EXPOSED OUTSIDE THE WIRENUTS.
3) To ground the fixture, connect the bare or green
supply ( house ) wire to the green wire from
the fixture using a wirenut.
See diagram 1.
IF THE POWER SUPPLY WIRING DOES NOT HAVE
A GROUND WIRE, CONSULT YOUR LOCAL
ELECTRIC CODE FOR APPROVED METHOD.
Attacher le cable d’alimentation noir au cable noir
de la lampe ,et le Cable d’alimentation blanc au
cable blanc de la lampe à l’aide des connecteurs,
Raccorder le fil de terre de la lampe au fil de terre
de l’alimentation en utilisant un connecteur.
THE FIXTURE SHOULD NOT BE OPERATED
WITHOUT THE WIREWAY COVER IN PLACE.
5) Replace the cover by reversing the steps as
described on page 2.
Diagram 2.
INSTALLATION INSTRUCTIONS
WIRING OF THE LIGHT FIXTURE
Diagram 1