Use and Care Manual

DOWNLIGHTS
35
800.821.6283 | www.nicorlighting.com
4” LED IC AIRTIGHT NEW CONSTRUCTION HOUSING
FEATURES
• Airtight housing limits the exchange of air between ceiling plenum and heated/cooled areas
• Washington State Energy Code approved to meet restricted airow requirements
• 5 1/2” height allows use in 2” x 6” joist construction
• Housing adjusts from 1/2” to 1 1/2” to accommodate ceiling thickness
• Listed for through branch circuit wiring and includes several 3/4” knockouts
• Heavy-gauge NICOR captive hanger bars provide greater stability, allowing housing to be
positioned at any point within a 24” joist span, then locked in place with set screws
• Unique hanger bar lip design helps align can to joist
• Four double-headed captive nails provide for ease of installation
• Bars can be repositioned 90° on plaster frame without tools
• Score lines allow bars to be shortened without tools to accommodate a 12” joist span
The 19000A-LED-ID features Ideal® connections that allows for quick, snap-in connection of NICOR® D-series LED downlights.
Suitable for new construction in residential and commercial applications. IC rated. Suitable for direct contact with insulation.
DAMP
LOCATION
RATED
DL
DIMENSIONS
19000A-LED-ID
4 1/8”
14 1/4”
10 1/4”
10 1/4”
8 1/2”
6”
5 1/2”
8.5in
(216 mm)
10.25in
(260 mm)
10.25in
(260 mm)
6in
(152 mm)
14.25in
(362 mm)
5.5in
(140 mm)
AIRTIGHT
HOUSING
ORDERING INFORMATION
Catalog Number Description
19000A-LED-ID 4” IC Airtight New Construction LED Housing
ATTENTION
This housing may have connector compatibility
issues with some of our D-Series downlights.
Please see page 28 for more info.