Product Brochure

Construction
• Cast aluminum flange and heat sink
• Plastic driver housing
• Output and CCT selection switches on back of housing
• Certified for direct contact with insulation
• Meets ASTM E283 airtight requirements
Optical System
• Precision engineered polystyrene diffuser provides
high uniformity, and reduced glare
• No visible diodes, hot-spots, or shadows
Electrical
• Wide range input voltage of 120 - 347 VAC
• Full-range dimming via 0-10VDC controls
• TM-21 Reported L70(9k) life >56,000 hours
• LM-79, LM-80 testing performed in
accordance with IESNA standards
• Meets FCC 15 PartB: 2016 Class A requirements
Installation
• Adjustable, spring loaded retention tabs ensure secure
fixture retention on ceilings up to 1 1/2” thick
• 2’ whip with 18” of FMC
• Easy installation into most 6” or 8”
incandescent or fluorescent frames
• Frame not needed for new construction installation
• Metal rough-in templates or frames available
• NON-IC Operating temperature of 0° to 104°F (-18°C to 40°C)
• IC Operating temperature of 0° to 77°F (-18° to 25°C)
• Suitable for wet locations
• For installations where power surge may be possible,
NICOR recommends installing additional surge protection
at the fixture or electrical distribution panel
Finish
• Matte white powder coat finish
Warranty
• 5-year limited system warranty standard
• Warranty does not cover product failure due
to an overvoltage event (power surge)
Arch. LED Troffer Retrofit Kit Product Information
TAR Select CLR Select
Ordering Information
Example: CLR62SWRVS9WH
Series Diameter Version Output Voltage CRI Color
CLR 6 (6 inch) 2 (2.0) S (Standard) WRV (120-347V) 9 (90 CRI) WH
8 (8 inch) H (High Output)
1
1) High Output only available on CLR8
Specications and dimensions subject to change without notice.
Performance Data
Model # Nominal Lumens Lumens (Lm) Nominal CCT Watts (W) Lumens/Watt
CLR62SWRVS9WH
1000
1058 3000 46.1 130.3
1069 3500 38.4 137.2
1082 4000 33.6 138.0
1063 5000 33.6 138.0
1500
1552 3000 45.1 142.7
1569 3500 38.4 150.9
1588 4000 33.6 154.1
1559 5000 20.1 150.8
CLR82SWRVS9WH
1500
1599 3000 30.6 127.9
1610 3500 25.3 132.7
1625 4000 20.1 134.7
1602 5000 20.1 150.8
2000
2078 3000 29.7 140.0
2092 3500 25.3 146.0
2111 4000 20.1 150.8
2082 5000 20.1 150.8
CLR82HWRVS9WH
2000
2054 3000 31.0 126.1
2155 3500 25.4 131.1
2190 4000 20.2 135.0
2153 5000 20.2 151.9
3000
3037 3000 30.0 138.2
3186 3500 25.4 144.3
3239 4000 20.2 151.9
3184 5000 20.2 151.9
Selectable CCT
External switch allows
easy CCT Selection: 3000K,
3500K, 4000K or 5000K
Selectable Lumens
External switch allows easy output
Selection: 1000LM & 1500LM for 6”,
1500LM & 2000LM for 8” Standard, and
2000LM & 3000LM for 8” High Output
CLR Select
6” and 8” Commercial
Recessed LED Downlight
Simple Versatile Solutions
Designed for both new construction and retrofit applications, the
CLR Select series can be installed directly into drywall, a ceiling
grid or an existing 6” or 8” mounting frame using spring loaded
retention tabs. The CCT and output selectable design allows for
easy adjustment to 3000, 3500, 4000, or 5000K and standard or high
output. With accessory trims in nickel, oil-rubbed bronze and black,
and offering a full range of dimming from 0-10 volts, the CLR Select
is adaptable to most any environment. The versatility of this light
source is perfect for commercial applications, such as educational,
governmental, retail and grocery, office or hospitality lighting.
6” Standard
8” Standard
8” High Output
Performance
Provides cool operation without
emitting UV radiation or heat
Easy Installation
Spring loaded retention tabs and
built-in LED Driver is a breeze to install
with no housing or frame required
Trim Covers
Oil Rubbed Bronze,
Brushed Nickel, and Black
A
D
H
.
Model (Lm) Diameter Height Aperture Ø
CLR6 7.4in (188mm) 4.5in (114mm) 5.2in (132mm)
CLR8S 9.5in (240mm) 5.2in (132mm) 7.5in (191mm)
CLR8H 9.5in (240mm) 5.6in (143mm) 7.5in (191mm)
Representative image. Exact models vary.
5 YEAR
WARRANTY