Specification

NICOR, Inc. 2200 Midtown Place NE, Albuquerque, NM 87107 P: 800.821.6283 F: 800.892.8393
www.nicorlighting.com October 9, 2018 10:37 AM
1.57 in
(39.8 mm)
DGD2
2” Gimbal Recessed LED Downlight
Product Description
The DGD LED Downlight Gimbal Series oers a line of gimbal downlights that simplify installing
tailored lighting in challenging locations. The high performing light engine with o-board driver
allows for more exible installations and increased lifetime with improved thermal management.
The DGD xture uses a plenum-rated cable connector to link the downlight module to the remote
driver box and then pops into place with its adjustable, spring-loaded retention tabs for a secure t,
eliminating the need for a J-box or recessed housing. Adding directional lighting for architectural
accent in areas such as living rooms, hallways, stairways and corridors is now easier than ever.
Construction
• Cast aluminum trim routes heat away from electrical components
• Adjustable, spring loaded retention tabs ensure secure xture retention
• Certied for direct contact with insulation
Optical System
• COB with greater than 90 CRI and an R9 greater than 50
• TIR optic provides smooth, uniform light with a 41° beam angle
• 32° Tilt with 360° rotation
Electrical
• O-board driver minimizes installation height and maximizes xture life through improved heat
management
• 120V input to driver
• Dimmable to less than 5% with compatible TRIAC dimmers
• Operating temperature rating of 0°F to 120°F (-18°C to 49°C)
• Lifetime rated for greater than 54,000 hours
• LM-79, LM-80 testing performed in accordance with IESNA standards
Finish
• Exterior white powder coat nish
• Also available in Black, Oil-Rubbed Bronze and Nickel
Installation
• Spring loaded retention arms allow for easy installation with no need for a recessed housing
• O-board driver/junction box includes three 1/2” KOs and three-port poke-in connectors
• Extension power cables (2’, 10’, 20’) available
• Suitable for damp locations
Warranty
• 5-year limited system warranty standard
• Warranty does not cover product failure due to an overvoltage event (power surge)
• For installations where power surge may be possible, NICOR recommends installing additional
surge protection at the electrical distribution panel
Type
Date
Catalog
Project
2.55 in
(64.8 mm)
1.49 in
(37.7 mm)
T24
California Title 24
High Energy
Compliant
Can be used for
5.25 in
(133.4 mm)
1.53 in
(48.33 mm)