Installation Guide

7
Place driver box into ceiling.
(Optional: Mount using mounting tabs and screws)
Push up spring-arms on side of xture, lift into ceiling, and release spring-arms.
5
Connect light engine. Be sure to properly align
connectors and fully screw down connector cover.
Turn on power and enjoy your new lighting.
6
8
Installing the DGD LED Recessed Downlight
Make sure all power is turned o before beginning installation
Make wiring connections as follows:
a. Connect Black wire to line wire.
b. Connect White wire to neutral wire
c. Connect Green wire to ground wire
Tighten Romex connector clamp and close junction box.
3
4
DRIVER
LINE
Black (line)
Ground
White (neutral)
Black (line)
Green (ground)
White (neutral)
DGD