Installation Guide
DLR56 5” & 6” Recessed LED Downlight
INSTALLATION INSTRUCTIONS
DLR56-3008
Risk of Fire or Shock:
LED Retrot Kit installation requires knowledge of luminaires electrical systems. If not qualied, do not
attempt installation. Contact a qualied electrician.
Supply conductors (power wiring) connecting the xture must be rated minimum 90°C. If uncertain, consult
an electrician.
Risk of Electric Shock:
Disconnect power at fuse of circuit breaker before installing or servicing.
Risk of Fire or Electric Shock:
Install this kit only in the luminaires that has the constructions features and dimensions shown in the
photographs and/or drawings.
Do not make or alter any open holes in an enclosure of wiring or electrical components during kit installation.
Do not alter, relocate, or remove wiring, lampholders, power supply, or any other electrical component.
To prevent wiring damage or abrasion, do not expose wiring to edges of sheet metal or other sharp objects.
The DLR 5” & 6” Recessed LED Downlight is designed to t into
a 5” or 6” housing with torsion spring receiving brackets. For use
in a 5” housing simply compress the torsion spring arms inward
until torsion springs line-up with mounting brackets. Torsion
arms serve as grounding connection. No tools are necessary for
installation.
Carefully unpack the downlight from its packaging. Inspect
product for defects due to shipping.
Disconnect Edison base from downlight and screw into socket
inside recessed housing. (GU24 base option available).
Plug the downlight connector into the Edison (or GU24) base
connector.
Squeeze torsion springs together and install into torsion spring
brackets inside recessed housing.
Carefully route wires into housing and push the downlight up.
Remove protective cover and push ush to ceiling surface.
1
2
2
3
3
4
4
5
5
NICOR, Inc. | 2200 Midtown Place NE, Albuquerque, NM 87107 | 800.821.6283 | www.nicorlighting.com | rev 08.14.15
CAUTION: To avoid possible electric shock, be sure that power supply is turned o at fuse box or circuit
breaker before attempting installation or servicing of the xture. For safest operation read and become
familiar with complete installation instructions prior to use.
Warranty
For complete warranty information please visit :
http://nicorlighting.com
NOTE: This luminaire has been modied and can no longer operate the originally intended lamp. The
provided label must be applied to the retrotted luminaire where visible during re-lamping.
COMPATIBLE HOUSINGS: For a selection of NICOR housings, please visit our website: www.nicorlighting.com