Installation Guide

Power on the xtures to enjoy your new accent lighting.
4
1c
Power (Jbox):
Choose access points in the Jbox where power in and power out is preferred.
Make wiring connections (see wiring instructions below).
Jbox
Black (Line)
White (Neutral)
Green (Grd)
Black (Line)
White (Neutral)
Green (Grd)
120V Only splice accessory to Under Cab
Note: Only use splice accessory for J-box to Under Cab connection
Mounting Under Cabinet:
Mount the under cabinet to surface using the (2) provided captive
screws. Mount additional under cabinets within 72”.
(step 1b-1c only required if using Jbox in installation)
Mounting Jbox:
Mount Jbox to surface using provided screws within 72” of rst
under cabinet mounted.
1a
1b
Installing Under Cabinets
Note: On 30” & 40” under cabinets an additional mounting hole is located in the center of
the wiring trough.
Reference linkable Diagram to ensure
correct end is being plugged in.
3a
Power (Plug):
Ensure that all interconnected units are connected before
supplying power. Ensure that the power switch of each unit is
set to o, then plug the power plug into wall socket.
Linkable Cord Installation:
Remove power port cover from end of fixture then connect linkable
cord to under cabinet.
2
Note: If installing multiple xtures, use jumper accessory to
connect xtures together.