Installation Guide

LED NUC-4 Linkable
INSTALLATION INSTRUCTIONS
What’s In The Box Optional Accessories
Tools Needed
Type A
One (1) LED Under Cabinet
Splice
(White, Black)
Jbox
(White, Black)
Connector
(White, Black)
Plug
(White, Black)
Jumper
(6”, 12”, 24”, 72”) (White, Black)
This LED Under Cabinet requires very few tools
for installation. A Phillips Head Screwdriver will be
needed to install the xture to cabinetry.
CAUTION
1. Read all instructions carefully for safe operation and installation.
2. To avoid possible electrical shock, shut o electricity before the installation.
3. All wiring must be in accordance with national and local electrical codes. Installation work and electrical
wiring must be done by a qualied electrician.
4. Do not install over a heat source.
Note: Power will always come in on switch side of under cab.
Match ( ) symbols for proper
Type B connection
Match ( ) symbols for proper
Type A connection
Type B
Match
Symbol
Match
Symbol
Linkable Diagram
Match symbols to ensure correct connections are being made.
Match
Symbol
Match
Symbol
Top view of Under Cab
Side view of Under Cab
Side view of Under Cab
Model Electrical Rating Max Units Max Distance Between Units
NUC-4-08-DM-L-## 120 Vac, 60 Hz, 0.038A
30 72”
NUC-4-12-DM-L-## 120 Vac, 60 Hz, 0.057A
NUC-4-21-DM-L-## 120 Vac, 60 Hz, 0.083A
NUC-4-30-DM-L-## 120 Vac, 60 Hz, 0.110A
NUC-4-40-DM-L-## 120 Vac, 60 Hz, 0.145A