Instructions / Assembly

NICOR, Inc. 2200 Midtown Place NE, Albuquerque, NM 87107 P: 800.821.6283 F: 800.892.8393 www.nicorlighting.com February 14, 2023 11:09 AM
Installation Steps - Under Cabinet Mount(continued)
Using the included cord grip, insert supply wiring into housing
and make wiring connections per the wiring diagram.
5
Reattach the driver cover, pressing until it is retained by
the slots.
6
3 4
Reattach the lens to the housing, making sure it is fully installed
across its length.
Apply power and test for proper function. For model with On/
O switch, test to control illumination. The CCT selection slider
can be positioned to the desired color temperature.
Installation Steps - Wall Mount with 4/O box
Turn o power to appropriate circuit at the breaker box.
1
Remove the center knockout from the back of the xture.
2
3 4
Remove the lens by squeezing and peeling away from xture.
Open the driver cover by uncliping tray and swinging open.
Pull xture wiring out from xture and make wiring
connections per the wiring diagram.