User's Manual

No AMO – NP – 15167 – 01 10
/11
8. Considerations for card handling
Please use applicable cards. This equipment cannot handle any cards other than
those specified.
1) Remove any foreign objects from the card.
Wipe moisture or oils from cards with a dry cloth prior to using.
Remove any, sticking tape, clips, or eraser residue to prevent card read errors.
2) Damaged cards may not be used on this equipment.
Warped, bent, curled, punctured, or cracked cards may cause read/write errors or
card jams.
3) Unreadable card
Damaged or demagnetized cards may make a normal read operation impossible.
9. Daily maintenance
Daily checks and maintenance shall be performed as follows.
1) Cautions
Maintenance must be done with the AC switch shut off. Any maintenance work
requiring with upper case removal, should be referred to a trained service
technician.
2) Daily maintenance
Each cable connector must be securely connected.
Cables shall not be placed under the equipment or removed.
3) Cleaning
Use a dry cloth to clean the MCRW case.
For more extensive case cleaning, a damp cloth with a neutral detergent should
be used. After cleaning the case should be wiped off with a dry cloth.
5) The magnetic head should be periodically cleaned. It is recommended that an
approved cleaning card be used for this purpose.
(Cleaning card :Sankyo P/N SBE018601)