User's Manual

No AMO – NP – 15167 – 01 2
/11
1. Before use
This operation manual is written for technical staff experienced in the general operation
of magnetic and Non-contact IC card reader/encoders. It is intended to describe the
operation of NIDEC Sankyo 's model ICI3Q8-5293.
The terminal manufacturer shall be responsible to furnish an operation manual for end
users.
2. Important Notice
Misuse or mishandling may shorten product life or cause the product to malfunction or
operate improperly.
Please read this manual thoroughly to understand proper care and operation of the
ICI3Q8-5293.
3. Attentions to this instruction manual and cautions
This equipment is packaged for use in North America. Use in other areas will necessitate
substitution of the power cord. Please check with the terminal manufacturer for an
appropriate cable if used outside North America.
1) A user may not repair this equipment. Please ask specialized service personnel for
repair.
2) Repair or service by unqualified/untrained personnel may result in damage to the
equipment or personal injury. Please refer all repair/service operations to a trained
service technician.
3) Use of third party supplied spare parts, could result in damage to equipment or
personal injury. Use only factory supplied spare parts in service of this equipment.
4) Ensure product is placed in a clean and stable location to prevent from falling or
dropping. Please hold the product by the lower case when transporting or moving.