User's Manual

No AMO – NP – 15167 – 01 6
/11
2) USB Cable
Ensure that the AC switch is off.
Turn the MCRW over and insert the USB cable securely into the USB
connector. Connect the other end to the appropriate USB port on the
HOST.
USB Connector
USB Cable
.
3) Power cable (Plug)
Set the MCRW in an upright position and plug in the power cable
securely to AC120V outlet (grounded triple pin).
Cautions
1. Do not exceed rated power supply input voltage
2. The power cable supplied with the MCRW is rated +125V 15A. Do not use
underrated power cables or extension cords. Underrated power cables or
extension cords could cause a risk of fire or overheating.
3. A grounded triple pin outlet should be used for power.
4. Please hold the plug portion when the power cable is inserted or removed.
Do not pull on the cable.