Installation & Assembly

1. Carefully remove all parts from the box.
2. Attach the harp (C) to the saddle (D).
3. Remove the finial (A) from the harp (C).
4. Place lampshade (B) to the harp (C) and secure with finial (A).
5. Insert bulb (not included) into the sockets.
6. Remove the plug cover (E) from the plug.
7. Plug into a proper electrical outlet and test the fixture.
8. Installation is complete.
***Clean with a dry, soft cloth only. Use no harsh abrasives or chemical agents.
Rhodes Buffet Lamp
Item # NW 3016
INSPECT ITEM CAREFULLY BEFORE ATTEMPTING TO INSTALL. IF THERE IS ANY
DAMAGE OR OBVIOUS DEFECT. DO NOT INSTALL.
ITEM MAY NOT BE RETURNED ONCE IT HAS BEEN INSTALLED.
NOTE: CAREFULLY UNPACK EACH PIECE IN TOP LAYER OF PACKING PRIOR TO
REMOVING. RETAIN ALL PACKING MATERIAL UNTIL INSPECTION AND
INSTALLATION ARE FINAL.
DRY