Assembly Instruction

Page 3 of 7
N&D 0109
Ginger Twin Loft Bunk Bed
A s s e m b l y I n s t r u c t i o n s
Be sure the holes are free of wood chips
and saw dust.
Bolt and Barrel Nut Assembly.
Do not force the Bolt as you may strip the
thread. Be sure the thread is properly started.
100mm
Bolts
100mm
Bolts
100mm
Bolts
Barrel Nuts
Barrel Nuts
Barrel Nuts
Barrel Nuts
Long Frame
Stretcher--
*IMPORTANT NOTE:
Do not use the stretcher which
has extra holes. This is for the front
to attach the Front Gruard Rail.
Rear Guard Rail
Post L1
Post R1
100mm
Bolts
Assemble the Rear parts: Rear Guard Rail, Stretcher, Long Frame to Posts L1 & R1.
2A
Identify the Posts L1 & R1, as shown below and
lay them out on the floor. A carpeted floor is best
so as to not damage the wooden parts.
Tap wooden dowels into the dowel holes on
the ends of the Rear Guard Rail, Stretcher
and Long Frame. Use 100mm Bolts
and Barrel Nuts to join
them together.
Wooden
Dowels