Assembly Instruction

Assembly Procedure
1
Assembly
Instructions
i
End TableCoffee Table
Assembled view
Parts in this box
2
3
Page 1 of 1
Check that all holes are free of
wood chips and sawdust.
Helpful Tips: Fastening of Bolts
A screwdriver will help in aligning
the Barrel Nut hole with the Bolt.
Screw the Bolt in gently to avoid
stripping the threads.
1.
2.
3.
4.
Turn the Table Top upside down as shown on diagram.
Be sure that the Table Top is laying on a flat smooth surface.
Attach the Leg Frames to the Apron using the 100mm Bolts
and Barrel Nuts. - LEAVE BOLTS VERY LOOSE!
Fix the Shelf Frame to the Leg Frame using the 40mm
Bolts. Nuts are already fixed inside the magazine shelf.
When all parts are assembled, gently tighten all the Bolts.
FUTON ACCESSORIES
RALEIGH TABLE
N&D-0404
This assembly instruction
shows Coffee Table
assembly. Procedure is
the same for both sizes.
Leg Frame Assembly
x 2 Pieces
Table Top (Apron attached) x 1 Piece
Magazine Shelf x 1 Piece
Allen Key
x 1 Piece
Barrel Nuts
x 4 Pieces
Hardware in this box
100mm Bolts x 4 Pieces
40mm Bolts
x 4 Pieces
Leg Frame
Barrel Nut
Table Top
Table Apron
Magazine Shelf
Allen Key
Leg Frame
Barrel Nut
40mm Bolts
100mm Bolts
40mm Bolts
100mm Bolts
40mm
Bolts
40mm
Bolts