Assembly Instruction

Page 1 of 2

Layout the parts and Bolt the Slats to the Back Rail

Rattan Daybed Trundle

A s s e m b l y I n s t r u c t i o n s

1107

Lay set of Slats inside the Back

Rail as shown below. Use

40mm Bolts to fix the

Slats to the Back Rail.

Attach the Brackets

loosely to the

Front Panel.

Attach the Metal Bracket

with 16mm Bolts to the

Front Panel.

Leave the Bolts loose!

Parts in this Box 1

Hardware in this Box 1

1C 1E

Parts in this Box 2

Front Panel x 1

Back Rail x 1

Set of Slats x 1

40mm Bolts x 12

30mm Wood

Screws x 20

16mm Bolts x 6

Metal Brackets

x 3

Allen Key

x 1

Back Rail

40mm

Bolts

16mm Bolts

16mm

Bolts

16mm

Bolts

Front Panel

Set of Slats

40mm

Bolts

40mm

Bolts

PAGE 1
Assembly Instructions Rattan Daybed Trundle 1107 1D Layout the parts and Bolt the Slats to the Back Rail 1A Parts in this Box 1 Lay set of Slats inside the Back Rail as shown below. Use 40mm Bolts to fix the Slats to the Back Rail. Front Panel x 1 40mm Bolts 40mm Bolts Back Rail x 1 Back Rail 1B Parts in this Box 2 40mm Bolts Set of Slats x 1 1C Hardware in this Box 1 40mm Bolts x 12 1E Attach the Brackets loosely to the Front Panel.
PAGE 2
Assembly Instructions Rattan Daybed Trundle 1107 2A Attach the Front Panel to the Slats. Wood Screws Attach the Front Panel with 40mm Bolts to the Slats. Use the Wood Screws to fix remaining slats to the Front and Back Rail (total 20 screws.) An electric screwdriver will make this much easier.