Assembly Instruction

Leave the top

hole empty!

Arm

20mm Bolt

Inside of Arm

Leave the top

hole empty!

20mm Bolt

Leave the top

hole empty!

20mm Bolts

x 12

40mm Bolts

x 8

30mm

Wood Screws

x 16

Allen Key

x 1

Page 1 of 2

0907

Rosebud Daybed

Hardware in this Box.

One pair of Daybed Arms in this Box:

Fit Bolts loosely to Arms.

Note: The back legs

have extra holes to

fix the Back Panel

Left Hand

Insert the 20mm Bolts into the bottom

two holes on the Arms. Screw in

about five turns only.

Right Hand

The Bolts

should be

left sticking

out like this!

ASSEMBLY

INSTRUCTIONS

PAGE 1
Rosebud Daybed ASSEMBLY INSTRUCTIONS 0907 1A One pair of Daybed Arms in this Box: Note: The back legs have extra holes to fix the Back Panel Left Hand Right Hand 1B Hardware in this Box. 20mm Bolts x 12 40mm Bolts x8 30mm Wood Screws x 16 Allen Key x1 1C Fit Bolts loosely to Arms. Insert the 20mm Bolts into the bottom two holes on the Arms. Screw in about five turns only.
PAGE 2
Rosebud Daybed ASSEMBLY INSTRUCTIONS 1007 2A Fix the Rails to the Daybed Arms. Note: The back legs have extra holes to fix the Back Panel Carefully hook the Stretchers onto the Bolts on the Arms. 20mm Bolts Metal Plates 20mm Bolt Note: Dont fully tighthen the Bolts until the whole frame is put together. Stretcher Stretcher Fix the Top Bolt on the Stretchers. 2B Fit the Slats between the Rails. 40mm Bolts Lay the slats out between the Rails.