Assembly Instruction

ManualsBrandsNight & Day ManualsBedsNight & Day Seagull Daybed Back Panel

0108

Page 1 of 2

Fit the Side Panels to the Drawer Front,

fitting the dowels in the holes. Use two

16mm Bolts to attach the Side Panel in

place, but don't fully tighten these yet.

Leave

them a bit loose, to make fitting

the Back Panel easier.

Fit the Support into dowel holes

provided on the Drawer Front.

Fit Side Panels and Support onto Drawer Face.

Lay the Drawer Front on a smooth, flat

surface so the holes are facing upwards.

Parts in this box.

Assembled View.

Hardware in this box.

D A Y B E D D R A W E R S

Daybed Collection

ASSEMBLY

INSTRUCTIONS

Drawer Front x 2

Drawer Bottom x 2

Side Panel x 4

Side Support x 4 Center Support x 2

Back Panel x 2

Allen Key x 1

Barrel Nuts

x 8

60mm Bolts

x 8

40mm Threaded

Wood Bolts x 8

16mm Bolts

x 8

Dowels

Side

Panel

Bracket

Center

Support

Side

Panel

Drawer Front

Side

Support

Side

Support

Drawer

Front

16mm Bolts

Nuts are already

provided in the

Drawer Front.

Bracket

Side Panel

Remember, Leave these Bolts LOOSE!

Summary of content (2 pages)

PAGE 1
DAYBED DRAWERS ASSEMBLY INSTRUCTIONS Daybed Collection 1 2 Assembled View. 3 Parts in this box. Drawer Front x 2 0108 Hardware in this box. 60mm Bolts x8 16mm Bolts x8 40mm Threaded Wood Bolts x 8 Barrel Nuts x8 Side Panel x 4 Back Panel x 2 Drawer Bottom x 2 Side Support x 4 Allen Key x 1 Center Support x 2 4 Fit Side Panels and Support onto Drawer Face. Side Support Side Panel Side Support Side Panel Lay the Drawer Front on a smooth, flat surface so the holes are facing upwards.
PAGE 2
DAYBED DRAWERS ASSEMBLY INSTRUCTIONS Daybed Collection 5 6 Fit in the Plywood Panel. Guide the Plywood Panel in carefully so that it won't jump out of its grooves. Fit the Back Panel. 0108 7 Bolt the Side Supports. Gently spread the Side Panels apart a bit to fit the dowels. Afterwards, tighten the bolts on the Brackets. Side Panel Bolt the Side Supports with 40mm Threaded Wood Bolts.