Installation Manual

11
A device can be added to the Night Owl X App by using the application’s
Smart Auto Detection or through a QR Code Setup. With Smart Auto Detection,
your NVR will automatically be detected by the Night Owl X software, making
connecting easy! To use this preferred method, ensure your Smart Device and
NVR are both on the same network.
Connecting and Adding your Device
Ethernet
Cable
WIFI
Using Night Owl X
NOTE: When adding a new device, it may take 5–10 minutes before you begin
receiving notifications.
If your Smart Device and NVR are on the
same network, the Smart Auto Detection
will auto find your NVR. If this method
is not available, please use the QR Code
Setup from step 4B below.
4A
Smart Auto Detection
To use the QR Code Setup, select Setup
device by QR Code and hover your Smart
Device camera lens over the QR Code
located on the top of your NVR.
4B
QR Code Setup
To begin adding a new device, first select the
yellow plus sign within the Device menu.
Adding a Device
4