Installation Manual

Wireless NVR Rear View

Audio Output – Allows for the connection of an ampliﬁed speaker.

VGA Output – Allows for a video connection. If the TV/Monitor does not

have an HDMI input but does have a VGA input, connect the VGA cable

from the VGA output port on the NVR to the VGA input port on your TV/

Monitor. (VGA cable not included)

HDMI Output – Allows for a video connection. If the TV/Monitor has an HDMI

input, connect the HDMI cable from the HDMI output port on the NVR to the

HDMI input port on your TV/Monitor.

RJ-45 (Ethernet) Port – Used to connect the Wireless NVR to your modem/

router for remote viewing. Please note your Wireless NVR comes with built-in

Wi-Fi for the cameras to transmit to the NVR. However, you will need to

manually connect the NVR to your modem/router to remotely view on a smart

device or PC/Mac

USB Ports – Allow for the connection of a USB mouse and/or a USB ﬂash

drive. Connect the included USB mouse to assist in navigating the NVR’s

menu interface. Connect a USB ﬂash drive to download video ﬁles from the

NVR for long term storage or sharing.

Power Input – Used to connect the included 12V DC power supply.

NVR Antenna Mount – For installation of two included NVR antennas.

NOTE: The maximum number of cameras you can connect to your Wireless NVR will be

determined by the number of channels.

AUDIO

OUTPUT

GROUND

VGA

HDMI

LAN

USB

POWER

12V

Product Overview