Installation Manual

Connect the Wireless NVR power
adapter to the Power Input on the
rear of the Wireless NVR.
NOTE: Power adapters will be labeled
as either NVR or Camera.
7
Connect the included camera
antenna to the antenna mount on
the camera.
9
Plug the Wireless NVR power
adapter into a surge protector or
Uninterruptible Power Supply
(UPS). (Surge protector and UPS
not included)
8
To ensure all cameras are working
properly, please test them locally
before installing them.
10
Each camera comes equipped
with its own camera power
adapter. Connect the female
power cable coming from the
camera to the male power end of
the camera power adapter. Next,
plug the camera power adapter
into a wall outlet.
11
6
NOTE: You should see each camera appear on your TV/Monitor. You may now proceed to
install your Wireless NVR cameras in the desired location.
(Surge Protector
Not Included)
NOTE: Make sure NVR is in intended
location before testing cameras.