User Guide

18
5.2 Pairing a Replacement Wireless Camera
By default, each camera within your Wireless NVR kit comes pre-paired to the Wireless NVR. Additionally,
your wireless NVR has its own built-in Wi-Fi for secure, uninterrupted video transmission and recording.
Pairing allows for the wireless transmission coming from the camera to be detected by the Wireless NVR.
However, if you have a camera that needs to be replaced while under warranty, the replacement camera
will similarly need to be paired to the NVR.
To pair a replacement camera to your NVR, please use the below steps:
NOTE: When pairing a Night Owl add-on camera, refer to “Add-on cameras Quick Setup Guide”.
NOTE: This should be done locally at the NVR to
avoid interference.
NOTE: The location of the camera reset button may vary.
1
2
3
A
B
C
A
B
C
Power on the replacement camera using
the camera power adapter.
With the NVR connected to a TV/Monitor,
right click on your mouse and navigate to
the Main Menu using the options bar.
Go to the Camera Menu and Select the Add
Camera tab on the left side of the menu.
The top portion of the screen will list
cameras that have been found but not yet
paired.
The bottom portion of the screen will show
all cameras that are currently paired to the
NVR.