User Guide

19
4
6
Next, you will need to reset the replacement
camera. To do so, press and hold the reset
button until you hear a beep, indicating the
camera has begun the reset process.
Within the Wireless Add screen, the
“Number of Cameras Connected” signifies
those cameras that are already paired to
the Wireless NVR and will not immediately
reflect this new camera.
NOTE: The reset process may take up to 3 minutes. NOTE: The location of the camera reset button may vary.
5
A
B
A
B
After 3 minutes have passed or after
hearing the camera beep, click on Wireless
Add located on the Add Camera screen.
Your NVR will now search for new cameras.
REMARQUE : The replacement camera will
not appear in the bottom screen with all other
paired cameras until the NVR finishes the
process of finding and pairing the new camera.
NOTE: You cannot exceed the number of Wireless NVR channels you have. If you have a 4 channel system, the
maximum number of cameras you can have paired is 4.