User Guide

21
1
4
2
3
5
6
7
Locate a camera and choose a location where you would like to mount the camera.
Insert the screw anchors.
Indicate screw positions by marking three holes on the surface where you plan to mount the camera,
using the holes in the camera base as a guide.
Using a drill bit slightly smaller than the included screw anchors, drill into the mounting surface
using the guide marks you placed in the previous step.
Line up the camera base holes with the screw anchors. Holding the base in place, insert screws and
tighten until secure.
Once the base is screwed in place, make sure that the camera is securely mounted by placing gentle
pressure on the mount.
Adjust the camera housing to point in the direction of the area you would like to monitor.
Follow these instructions to correctly install your cameras.