User Guide

27
7.1.1 Camera Test
7.1.2 Network Check
The Camera Test screen of the Startup Wizard serves as a reminder to test the camera connections to the
NVR. If a connected camera displays a “No Signal” message, please visit www.NightOwlSP.com and click
on the Support tab.
The Network Check screen of the Startup Wizard displays instructions on how to connect your NVR to the
Internet. You will need the included Ethernet cable to establish a connection. Though the cameras wirelessly
connect to the NVR, the NVR will not be able to wirelessly connect to your router/modem.
Once you have made the required connection using the Ethernet cable, you may click Test within the Startup
Wizard to confirm Internet connection.
NOTE: It may take up to 3 minutes for your wireless cameras to appear on screen.