User Guide

61
8.2.2 (d) Manual Edit
Camera: Select the camera you want to edit.
Protocol: Shows the protocol of the selected camera. Private (Night Owl), ONVIF (Standard).
IP Address: Network address of the connected camera.
Port: Allows access to your camera with your computer through your LAN or the Internet. The default value
is 80.
Audio Format: Audio codec used for the two-way audio communication. The default value is G711a but
G711u can also be used.
Enable: Will Enable (turn on) and Disable (turn off) the camera video stream.
MAC Address: The unique identifier assigned to the network interface of the camera for communications
at the data link layer.
Username: Shows the username of the credentials needed to establish a connection with the camera.
By default, admin.
Preview Stratage: Used for live view. If the signal of the connected camera to the NVR is not strong enough
to sustain a decent quality image, this function can adjust the mainstream transmission to improve video
quality.
Password: Shows the password of the credentials needed to establish a connection with the camera.
By default, password field should be empty.
Image Rollover: Will invert or reestablish the video image from the selected camera.