User Guide

62
8.2.2 (e) Repeater
Diagram: Shows the dependency of the Wi-Fi signal for each camera connected. What is shown in the
above diagram is CH1, CH2, CH3, CH6 and CH7 connected directly to the NVR, CH4 connected in Daisy
Chain to CH3 where CH3 works also as a repeater and CH5 connected in Daisy Chain to CH4 where CH4
works also as a repeater. The CH8 is disconnected.
Table: Shows the signal strength off each connected camera.
Refresh: Will update the diagram with any changes made.
Apply: Will apply any changes made.
Camera: Allows you to select which camera to modify.
Camera Name: Shows the current name and allows you to edit the name of the selected camera.
Image Settings: Allows to modify video image settings for the selected camera.
Show Display: Enable or Disable the functionality of Display Position.
8.2.3 On Screen Display