Quick Setup Guide

Wire Free Camera

NOTE: Each camera requires 2 rechargeable batteries, but can hold up to 4 batteries.

Use of 3rd party batteries may damage the camera and void your warranty. Compatible

batteries can be purchased at NightOwlSP.com.

Quick Setup Guide

Hardware Setup

Option 3a Setup Video

STOP: This camera is NOT for standalone use and MUST be paired to

a Night Owl

WNIP2 or BTWN8 Series Wi-Fi NVR. Only install a camera

in its final location AFTER it’s paired, and setup is completed.

Charge the camera(s) for at least 3 hours. Lift the rubber piece on the

camera's belly and connect the USB cable to the camera and a USB

power supply. Please ensure the batteries are installed or the camera(s)

will not charge.

Install the batteries. Press the button on the camera's belly to release

the battery cartridge and insert the batteries. Replace the cartridge

and connect the USB cable to the port under the rubber piece.

This camera is not for standalone use and must be added to a compatible

Night Owl

Wi-Fi NVR. Based on which Wi-Fi NVR you have, scan the QR

Code for easy-to-follow instructions on pairing your new camera.

Wi-Fi NVR

Series: Model #’s:

WNIP2 WNVR-WNIP2-1

Option 3b Setup Article

Wi-Fi Bluetooth

NVR

Series: Model #’s:

BTWN8 WNVR-BTWN8-1

PAGE 1
Quick Setup Guide Wire Free Camera STOP: This camera is NOT for standalone use and MUST be paired to a Night Owl® WNIP2 or BTWN8 Series Wi-Fi NVR. Only install a camera in its final location AFTER it’s paired, and setup is completed. Hardware Setup Install the batteries. Press the button on the camera's belly to release the battery cartridge and insert the batteries. Replace the cartridge and connect the USB cable to the port under the rubber piece.
PAGE 2
Quick Setup Guide Wire Free Camera Placing the Camera in Pairing Mode If the camera is not in pairing mode, press the button on the camera's belly to release the battery cartridge. Press and hold the reset button for 10 seconds or until the camera says, "Camera is in Pairing Mode." NOTE: The camera MUST be reset if it isn't paired to a Recorder within 2 minutes.