Installation Guide

1
What’s in the Box
Status Light Key
Quickly Flashing–Pairing Mode (default).
Slowly Flashing–Camera is not connected
to your WNVR or Wi-Fi network.
Solid Light–Camera is connected to
a network and functional.
Testing with a Smart Device
NOTE: For Option #2 setup, Night Owl recommends using your cell phone to test the
location for your WiFi signal strength before installing the camera.
NOTE: Whether you’ve purchased an indoor or outdoor camera, the setup is the same.
Camera (1x)
Bracket Mounting
Hardware
1 x 12V DC 1.0A
Power Supply (16.4 ft.)
Camera Antenna (1x)
Wireless IP Outdoor Camera
Model # CAM-WNR2P-OU
Wireless IP Indoor Camera
Model # CAM-WNVR2P-IN
Camera (1x)
5V DC 1.0A
Power Supply (1x)
Bracket Mounting
Hardware
Reset Pin (1x)
Adhesive Mounting
Tape (1x)
Magnetic Mounting
Bracket (1x)
9.8 ft. Power
Cord (1x)
Package Contents