QUICK SETUP GUIDE WNVR SERIES ADD-ON CAMERAS Indoor Outdoor Model # CAM-WNVR2P-IN Model # CAM-WNR2P-OU www.NightOwlSP.
What’s in the Box NOTE: Whether you’ve purchased an indoor or outdoor camera, the setup is the same. Wireless IP Indoor Camera Model # CAM-WNVR2P-IN Wireless IP Outdoor Camera Model # CAM-WNR2P-OU 9.8 ft. Power Cord (1x) Camera (1x) Camera (1x) Reset Pin (1x) Camera Antenna (1x) 5V DC 1.0A Power Supply (1x) Adhesive Mounting Tape (1x) Bracket Mounting Hardware Magnetic Mounting Bracket (1x) Testing with a Smart Device Bracket Mounting Hardware 1 x 12V DC 1.0A Power Supply (16.4 ft.
Add-On or Stand-Alone Night Owl gives you options! Your camera can be used as an add-on to an existing Night Owl Wireless NVR kit or as a stand-alone camera that records to a microSD card. Option 1: Pairing to your existing Wireless NVR System When used as an add-on to your existing Wireless NVR System, the camera can be viewed using your Night Owl X (for Smart Phones) and/or Night Owl X HD (for Tablets) application. Please follow the OPTION #1 setup instructions to add your camera.
Option #1: Pairing to existing Wireless NVR System By default, the camera will be in pairing mode when it’s first powered on. Pairing allows for the wireless transmission coming from the camera to be detected by the Wireless NVR. To pair an add-on camera to your Night Owl Wireless NVR, please use the following steps: NOTE: When pairing the camera to your NVR make sure you are in the same room as the NVR. ALWAYS test the camera locally before installing.
NOTE: Please be patient as NVR locates the add-on camera. May take up to 3 minutes. 4 With camera in pairing mode click on Wireless Add located on the Add Camera screen. Your NVR will now search for new cameras. NOTE: The add-on camera will not appear in the bottom screen with the other paired cameras until the NVR finds and pairs the new camera.
Pairing to existing Wireless NVR System 6 If you have not exceeded the channel limitation, the new camera will appear in a vacant video field once paired. 7 WooHoo! Your add-on camera has now been paired to the Wireless NVR using the Wireless NVR’s built in Wi-Fi.
Option #2 Stand-Alone Camera Setup Don’t have a Wireless NVR or want to use the camera on its own? No problem! To use as a Stand-Alone camera the following technical requirements must be met. 1 WiFi 2.4 GHz Router compatible with 802.11 b/g/n. 2 High Speed Internet Connection with a minimum of 2 Mbps upload speed. 3 Optional microSD Card needed to record (not included). To use as a Stand-alone camera: 1 Be in same room as the router during setup, if possible.
Using Night Owl Connect Download and Install Application 1 Download the App from the App Store or Google Play Store and install the application on your device. NOTE: Night Owl Connect will lead you through a step by step process for adding your camera to the App. NOTE: Setup is the same for phone and tablet. 2 Create an account using an email address for the username and a password between 6–20 characters.
Login to Night Owl Connect 4 Login to the App to complete Setup process. Camera should be in pairing mode (default mode). If the camera is not in pairing mode, please refer to page 9 for pairing instructions. 5 Click the plus symbol to begin setup. The App will lead you through the rest of the setup process. Night Owl X CMS Software The Night Owl X CMS Software allows you to view your Night Owl Security system remotely from a PC or Mac®.
Quick Tips To Pair Camera: For CAM-WNVR2P-IN–Insert the reset pin into the Sync/Reset hole and press until you hear the camera say “Please be patient. Camera is resetting”. Once the camera resets, you will hear “Camera is in pairing mode” and the Status light will flash quickly. For CAM-WNR2P-OU–Press and hold the reset button until you hear the camera say “Please be patient. Camera is resetting”. Once the camera resets, you will hear “Camera is in pairing mode” and the Status light will flash quickly.
Additional Support FAQs 1. Does my wireless NVR have to be connected to the Internet to work? No, your wireless NVR does not have to be connected to the Internet to work. You can view live feed and recordings by connecting it to a TV/Monitor via HDMI or VGA. 2. Will I be able to view my system while away from home? To view your wireless system remotely, your NVR will need to be manually connected to a modem/router via the included Ethernet cable.
CONTACT US PHONE (English, Spanish & French) Sales/ Technical Support 1.866.390.1303 Live Chat 24/7, 365 days a year EMAIL Sales Support Sales@NightOwlSP.com Technical Support Support@NightOwlSP.com WEBSITE 24/7 Product Support • How-To Videos • Manuals www.NightOwlSP.com iPhone, iPad, Mac and Mac OS X are registered trademarks of Apple Inc.
