Quick Setup Guide

2
Add-On or Stand-Alone
Night Owl gives you options! Your camera can be used as an add-on to
an existing Night Owl Wireless NVR kit or as a stand-alone camera that
records to a microSD card.
Option 1:
Pairing to your existing Wireless NVR System
When used as an add-on to your existing Wireless NVR System, the camera
can be viewed using your Night Owl X (for Smart Phones) and/or Night
Owl X HD (for Tablets) application. Please follow the OPTION #1 setup
instructions to add your camera.
NOTE: You must complete add-on camera setup in the same room as the NVR.
To use as a stand-alone camera, please follow the Option #2 setup instructions
found on page 6. You will need to download and install the Night Owl
Connect App to view and control the camera. A microSD card (not included)
will be required to use the recording function.
NOTE: Camera will be in pairing mode when first powered on. If the camera is
not in pairing mode please follow pairing instructions found on page 9.
Option 2:
Stand-alone Camera Pairing to your Router
RESET
LAN1 LAN2 LAN3 LAN4 WAN