Quick Setup Guide

3
Option #1: Pairing to existing Wireless NVR System
1
Power on the add-on camera
using the camera power adapter.
You will hear the camera say,
“Camera is in pairing mode”
and the status light will flash
quickly. If the camera is not in
pairing mode please refer to
page 9 for pairing instructions.
2
With the NVR connected to a
TV/Monitor, login, then right
click on your mouse and
navigate to the Main Menu
using the options bar.
By default, the camera will be in pairing mode when it’s first powered on.
Pairing allows for the wireless transmission coming from the camera to be
detected by the Wireless NVR.
To pair an add-on camera to your Night Owl Wireless NVR, please use the
following steps:
NOTE: When pairing the camera to your NVR make sure you are in the same
room as the NVR. ALWAYS test the camera locally before installing.
Go to the Camera Menu and
Select the Add Camera tab on
the left side of the menu.
The top portion of the screen
will list cameras that have
been found, but not yet paired.
The bottom portion of the
screen will show all cameras
that are currently paired to
the NVR.
3
A
B
C
A
B
C
NOTE: Setup is the same for
Indoor and Outdoor models.