Full Product Manual

By default, the DVR is set to record the full screen (No red grid)

Set to not record any event Only right section of the screen will recordSet to record full screen (default value)

RECORDING SENSITIVITY - Adjust the motion sensitivity needed to trigger a recording (Higher

sensitivity = more recordings).

8.4.1 Backup

8.4 Backup and Exporting Recordings

Note: Before inserting a USB flash drive into the DVR, it must be formatted to FAT32.

See Section 6: Video Backup, to learn how to format the Flash Drive.

Note: DO NOT connect the DVR’s hard disk drive to your PC or Mac!

Left click to access the Backup screen. You can add multiple recordings for backup. The screen

below shows the Backup Task Queue with the current Status.

03/29/2020 08:00:00 ~ 03/29/2020 18:00:00

H03,CH04,CH05 VIDEO USB DEVICE 0 %