Instructions / Assembly

10
A device can be added to the Night Owl X App by using the application’s
Smart Auto Detection or through a QR Code Setup. With Smart Auto Detection,
your DVR will automatically be detected by the Night Owl X software, making
connecting easy! To use this preferred method, ensure your Smart Device and
DVR are both on the same network.
Connecting and Adding your Device
If your Smart Device and DVR are on the
same network, the Smart Auto Detection
will auto find your DVR. If this method
is not available, please use the QR Code
Setup from step 4B below.
4A
Smart Auto Detection
4B
To use the QR Code Setup, select Setup
device by QR Code and hover your Smart
Device camera lens over the QR Code
located on the top of your DVR.
QR Code Setup
Ethernet Cable
WIFI
To begin adding a new device, first select
the yellow plus sign within the Device menu.
Adding a Device
4
NOTE: When adding a new device, it may take 5–10 minutes before you
begin receiving notifications.