Instructions / Assembly

3
Connecting Your System
HDMI
USB
Plug included HDMI cable into
the HDMI port on the back of
the DVR.
DISCLAIMER: Not all DVR’s include cameras. The following steps include instructions for camera installation.
1
Plug the USB mouse into the USB
port on the back of the DVR.
3
ETHERNET
Plug the included Ethernet
cable into the LAN port on
the back of the DVR.
4
Plug the other end of the
HDMI cable into the back
of the TV or monitor.
2
Router Not
Included
ETHERNET
Plug the other end of the
Ethernet cable into a numbered
port on the back of the router.
5
STOP: BEFORE installing, test each
camera locally to confirm they function
properly.
NOTE: To view cameras, TV/Monitor must be tuned
to the same Input the HDMI is plugged into.