SDS

_____________________________________________________________________________________________
8. EXPOSURE CONTROLS/PERSONAL PROTECTION
Control parameters
Exposure Guidelines
ACGIH TLV: American Conference of Governmental Industrial Hygienists - Threshold Limit Value OSHA PEL: Occupational Safety and Health
Administration - Permissible Exposure Limits NIOSH IDLH Immediately Dangerous to Life or Health
Other Exposure Guidelines
Vacated limits revoked by the Court of Appeals decision in AFL-CIO v. OSHA, 965 F.2d 962
(11th Cir., 1992)
Appropriate engineering controls
Engineering Measures
Showers
Eyewash stations
_____________________________________________________________________________________________
Precautions for safe handling
Handling
In case of rupture. Handle in accordance with good industrial hygiene and safety practice.
Use personal protection equipment. Avoid contact with skin, eyes or clothing.
Conditions for safe storage, including any incompatibilities
Storage
Keep containers tightly closed in a dry, cool and well-ventilated place. Keep out of the reach
of children. Keep in properly labeled containers.
Incompatible Products
None known.
6. ACCIDENTAL RELEASE MEASURES
Personal precautions, protective equipment and emergency procedures
Personal precautions
Use personal protective equipment as required. Avoid contact with skin and eyes. Do not
breathe dust.
Environmental precautions
Environmental precautions
Prevent entry into waterways, sewers, basements or confined areas. Do not flush into
surface water or sanitary sewer system. Prevent product from entering drains.
Methods and material for containment and cleaning up
Methods for containment
Prevent further leakage or spillage if safe to do so.
Methods for cleaning up
In case of rupture. Use personal protective equipment as required. Cover powder spill with
plastic sheet or tarp to minimize spreading and keep powder dry. Pick up and transfer to
properly labeled containers. Avoid generation of dust. Clean contaminated surface
thoroughly.
Revision Date 11-Oct-2013
1116269 - R03P AAA
7. HANDLING AND STORAGE
Page 4 / 9