Manual

38
HDA Series Users Manual
7.1.3 Network
a. Main: find network values and optimize
connectivity based o
your Internet connection. In most cases the values should populate
automatically once your DVR is connected to the Internet. The values in this
section should only be adjusted if you are an advanced user and have extensive
experience in device networking.
PPPOE: for broadband dial-up network users only. You will need to contact your
ISP to retrieve the User Name and Password needed to complete this type of
connection.
DHCP: the most common network connection type. These values will be gathered
automatically from your ISP when connected.
Static: modify these values if you are using a static IP address. Information can
be obtained from your router and ISP.
Media Port: allows access to your DVR from a mobile device. The default value of
9000 should generally be used for most cases.
Web Port: allows access to your DVR with your computer through your LAN or the
Internet. In most cases the default value of 2049 or 2051 will provide the most
optimal connectivity.
IP Address: network address of the connected DVR.
Subnet Mask: the range of IP addresses that can be found in the network. This
should always be set to the default address 255.255.255.000.
Gateway: the connection between two networks. This should always be the IP
address of the connected router.
DNS1: primary Domain Name System server address.
DNS2: secondary Domain Name System server address.
UPNP: Enable or Disable Universal Plug and Play abilities depending on your
network device capabilities.