Full Product Manual

21Chapter 4: Camera Installation

3. Using a drill bit slightly smaller than the included screw anchors, drill into the

mounting surface using the guide marks you placed in the previous step.

4. Insert the screw anchors.

5. Line up the camera base holes with the screw anchors. Holding the base in

place, insert screws and tighten until secure.

6. Once the base is screwed in place, make sure that the camera is securely

mounted by placing gentle pressure on the mount.

7. Adjust the camera housing to point in the direction of the area you would like

to monitor.

Don’t feel like installing the

system yourself? Let InstallerNet

™

do the work for you! Contact us at

1-800-806-5513 or visit us at