Full Product Manual

Chapter 8: Remote Access

For the following steps, use the information that you just wrote down. To access

the network settings on your DVR, go to the General Menu, then to Network >

Main and choose the Static option.

1. Manually enter the IP address into the IP Address field; this is the numbe

that ends with 150. You may have to add placeholder zeros for any sections

that do not contain three digits e.g. 192.168.1.150

192.168.001.150.

2. Confirm that the Subnet Mask is set to 255.255.255.000.

3. Enter the “Default Gateway” number from the prior section into the Gateway

field. Again you will need to add placeholder zeros in any sections that do no

contain three digits e.g. 192.168.1.1

192.168.001.001.