Installation Guide

2
Hybrid DVR Rear View
Images used are for reference only. Your product may vary slightly
depending on your model number.
1
2
3
4
5
6
7
8
9
1
9 9
2
5
6
74
83
Product Overview
Video Inputs – Allows for the connection of BNC wired cameras. Wireless
cameras connect to the DVR’s built-in Wi-Fi.
HDMI Output – Allows for the video connection. If the TV/Monitor has an
HDMI input, connect the HDMI cable from the HDMI output port on the
DVR to the HDMI input port on your TV/Monitor. NOTE: Preferred method.
Audio Output – Allows for the connection of an amplified speaker using an
RCA connector.
Audio Input – Allows for the connection of audio enabled cameras by
connecting the white RCA plug to one of the audio inputs. After making the
audio input connection, be sure to enable the audio function in the DVR’s
menu interface.
VGA Output – Allows for the video connection. If the TV/Monitor has a VGA
input, connect the VGA cable from the VGA output port on the DVR to the
VGA input port on your TV/Monitor (VGA Cable not included. VGA Port not
available on all models).
USB Ports – Allows for the connections of a USB mouse and/or a USB flash
drive. You will connect the included USB mouse to assist you in navigating
the DVRs menu interface. You will connect a USB flash drive to download
video files from the DVR and save them to your USB flash drive.
RJ-45 (Ethernet) Port – Used to connect the DVR to your router/modem via
the included Ethernet cable.
Power Input – Used to connect the included 12V DC power supply.
Hybrid DVR Antenna Mount – For installation of two included antennas.