Installation Guide

5
Connecting Your Wireless Cameras
NOTE: With the wireless camera powered on, you should see it appear on your TV/
Monitor within 3 minutes. Once it appears, you may proceed to mount the wireless
camera in its intended location. If the wireless camera does not appear, please refer to
page 6 of this Quick Setup Guide to re-pair the wireless camera to your DVR.
NOTE: Each wireless camera comes
with 1 antenna and mount.
Connect the included camera
antenna to the antenna mount
on your wireless camera.
To verify your wireless camera
is working, please ensure it
appears on your TV/Monitor
before mounting.
Each wireless camera comes equipped with its own camera power adapter.
Connect the female power cable coming from the camera to the male power
end of the camera power adapter. Next, plug the camera power adapter into
a wall outlet.
1 2
3
DISCLAIMER: Not all Hybrid kits come with wireless cameras. If you have purchased wireless
cameras as add-ons, please use the pairing guide included with the cameras for connectivity.
Make sure DVR is in intended
location before testing cameras.