Full Product Manual

26 THD Series User’s Manual
If your DVR is not able to establish Internet connectivity, a Connection Failed screen
will appear. Follow the instructions on this screen to re-test the network.
If you wish to proceed with the DVR setup without a network connection, you may
do so by clicking the box marked, “I do not want to connect to a network.”
6.1.3 Firmware Check
The Firmware Check screen of the Startup Wizard will automatically check for
updated firmware for your DVR.
NOTE: If your DVR does not have a network connection, the firmware will not update.
When the firmware for your DVR is updated to the most current version, the
Startup Wizard will display the above screen.